<
Create your own Layout with HanleyPRO Today! - Learn More

H60W-PPS5BOX12

H60W-PPS5BOX
Warranty 7P 5L
12V

Your favorite HanleyLED Premium Power Supplies, pre-assembled, and pre-wired in our ready to install SPEED BOX. Benefits include: speed up install time, UL Classified for dry, damp and wet locations, pre-installed toggle switch, for horizontal or vertical mounting, and pre-cut holes with UL caps for unused holes.

Features:
  • Fitted with 1 H60W-PPS5 Power Supply
  • Great versatility with Vertical or Horizontal mounting
  • Pre-installed UL Recognized Toggle Switch for even faster install
  • Plastic UL knockout caps and mounting screws included
  • UL Listed E350828
  • Easy to remove Galvanized Cover for faster service calls
  • Dry, Damp or Wet Location rated

Try our DIY Layout Tool: LED Layout Tool

Buy Now at Grimco:
Download Product Sheets:

Product Parameters

Specifications
Type Power Supply Enclosure
Input Voltage 12vDC
Watts 60w
Size 271.5x145x73.2 mm (LxWxH)
Weight 1.2KG
Packaging Individually Boxed
Safety Rating Class 2 for use with LEDs and LED signage
Mounting
Install the Speed Box in an accessible location and securely fasten in place.
The Speed Box includes drain holes for water egress so that no drilling is required.
When mounting in a wet/damp/dry location, please use weatherproof conduit and connectors for the primary power entry and exit points of the Speed Box.
Do not mount any additional LED Power Supplies into the Speed Box to avoid overheating.
Wiring
Ensure that service power is turned off before making any wiring connections.
Connect free white wire to service neutral.
Connect free black wire from switch to the service line (“hot”) wire.
Connect the service ground to the pre-bounded green wire in the enclosure. (please refer to drawings).
After each wire enters the enclosure, it should be formed into a drip loop to allow moisture to naturally flow to the bottom of the loop, keeping water from ingressing into wires and connections.
Finishing
Use provided plastic caps to plug any unused holes when wiring is complete.
Secure the cover with metal screws provide. Do NOT leave the cover off of the box.
Input range: 100-277 volts only. Make sure the primary wiring is routed such that it does not compromise the spacing requirements. Orient wire connections off bottom of box.
Call to find out how to get a free 150w power supply! 800-542-9941
New!

Introducing Labor Saving & Energy Saving Products - Learn More