Your favorite HanleyLED Premium Power Supplies, pre-assembled, and pre-wired in our ready to install SPEED BOX. Benefits include: speed up install time, UL Classified for dry, damp and wet locations, pre-installed toggle switch, for horizontal or vertical mounting, and pre-cut holes with UL caps for unused holes.
Features:
- Fitted with 1 H150W-PPS5 Power Supply
- Great versatility with Vertical or Horizontal mounting
- Pre-installed UL Recognized Toggle Switch for even faster install
- Plastic UL knockout caps and mounting screws included
- UL Listed E350828
- Easy to remove Galvanized Cover for faster service calls
- Dry, Damp or Wet Location rated
Try our DIY Layout Tool: LED Layout Tool
Buy Now at Grimco:
Download Product Sheets:
Product Parameters
Specifications
| Type | Power Supply Enclosure |
| Input Voltage | 12vDC |
| Watts | 150w |
| Size | 308.4x292x75..2mm (LxWxH) |
| Weight | 2.5KG |
| Packaging | Individually Boxed |
| Safety Rating | Class 2 for use with LEDs and LED signage |
Mounting
| Install the Speed Box in an accessible location and securely fasten in place. |
| The Speed Box includes drain holes for water egress so that no drilling is required. |
| When mounting in a wet/damp/dry location, please use weatherproof conduit and connectors for the primary power entry and exit points of the Speed Box. |
| Do not mount any additional LED Power Supplies into the Speed Box to avoid overheating. |
Wiring
| Ensure that service power is turned off before making any wiring connections. |
| Connect free white wire to service neutral. |
| Connect free black wire from switch to the service line (“hot”) wire. |
| Connect the service ground to the pre-bounded green wire in the enclosure. (please refer to drawings). |
| After each wire enters the enclosure, it should be formed into a drip loop to allow moisture to naturally flow to the bottom of the loop, keeping water from ingressing into wires and connections. |
Finishing
| Use provided plastic caps to plug any unused holes when wiring is complete. |
| Secure the cover with metal screws provide. Do NOT leave the cover off of the box. |
| Input range: 100-277 volts only. Make sure the primary wiring is routed such that it does not compromise the spacing requirements. Orient wire connections off bottom of box. |
